Open 7 Days A Week
8:00am - 8:00pm
Licensed & Insured

Pressure Washing 3 Common Home Surfaces

Pressure Washing 3 Common Home Surfaces

Pressure Washing 3 Common Home Surfaces

Seeing before and after results from pressure washing services can get anyone excited enough to buy a pressure washer and try to spray their whole house. A pressure washer can easily clean built-up dirt, grime, grease, algae, and mold. However, some spaces aren't appropriate for spraying with a pressure washer.

Homeowners are often very busy, and it is easy for them to let home projects and maintenance be forgotten until cleaning needs are beyond the power of human energy levels. Pressure washing in Orlando can be a valuable tool for getting your property back to its original glory.

With the proper size and type of pressure washing machine, you can clean patios, decks, pools, siding, driveways, lawn furniture, fencing, and even prepare surfaces for new paint. The use of a pressure washer can transform once dirty, dingy spaces into shiny and sparkling areas that no one will believe you were able to accomplish on your own.

Our experts offer this step-by-step guide for using pressure washing to help you learn the proper way to pressure wash surfaces around your home.

Expert pressure washing for house siding

Pressure washing vinyl siding can remove mildew and mold that has built up over the years. Vinyl siding is often an inexpensive, low-maintenance material that never requires painting. Unfortunately, this accessible maintenance material is also known for accumulating dirt, debris, mildew, and mold. When considering pressure washing siding, it is critical to remember that you cannot blast vinyl siding with too much force because of its malleability to avoid causing damage. Following these easy steps will make it easy to clean your vinyl siding and improve your home's curb appeal.

  • Safety First
    With any pressure washing job, it is essential to cover any exposed outlets. Avoid spraying outdoor appliances, electric lines, and conduits to ensure that you do not damage them.
  • Use the right tools
    You can use electric or gas-powered pressure washers at a PSI of at least 3,000 to reach those high out-of-the-way places when cleaning your siding surfaces.
  • Protect yourself
    Always wear goggles, gloves, and waterproof clothes to keep yourself protected during a power washing project.
  • Protect your plants.
    It is easy to protect bushes and shrubs from damage by the high-pressure spray by using a plastic tablecloth, a drop cloth, or a tarp to keep them covered while you spray.
  • Pre-treating
    Before breaking out the power washer and spraying on your vinyl siding, it can be helpful to scan the siding for particularly dirty or moldy areas. These areas can be pre-treated with a mixture of water and bleach. Then, scrubbing the spots with a sponge and rinsing with water ensures that the power washer can get the area cleaner faster.
  • Be prepared
    Before spraying the siding on your house, it is necessary to have cleaners available that are specially created for use with pressure washers. Most pressure washing equipment has injectors that mix your cleaning solution directly into the spray jet.
  • Testing
    Testing your pressure washer on a small area of vinyl siding before cleaning the whole house can give you an idea of the power needed to get all of the surfaces clean. Keep in mind that you can increase the impact on surfaces by allowing less distance between the spray jet and the siding. Further distances lead to less pressure.
  • Soap it up.
    Working from the bottom to the top, apply your detergent mixture onto the siding with smooth and steady strokes from the wand. Then, keeping your pressure washer wand pointed slightly downward, sweep the washer from left to right and overlap strokes to avoid water penetrating the underside of the vinyl and getting into the gaps of the siding.
  • Hurry up and wait.
    It's critical to allow the detergent to soak into the vinyl for 5 or 10 minutes. Just remember not to let it dry onto the surface.
  • Power rinse
    Start from the top and work your way down with the pressure washer to avoid streaking when rinsing away the detergent left behind from your first pressure washing pass.

Once the pressure washing process is complete on your vinyl siding, you can take a step back and marvel at the beautiful surface you have successfully restored.

Don't throw bricks. Clean them.

Brick surfaces are sturdy, timeless, and beautiful. However, like most other surfaces around the home, bricks can become mossy, dirty, and require regular cleaning maintenance. Because brick is porous and more prone to structural damage and discoloration, it is crucial to know the proper pressure washing methods for cleaning off bricks. Experts offer these necessary steps for pressure washing your brick surfaces.

  • Turn it off
    Be sure to turn off any outdoor electrical components and avoid pressure washing in high-voltage areas like central air units.
  • Use protection
    Remember to keep yourself safe by wearing goggles, gloves and, waterproof clothes while pressure washing.
  • Study hard
    Be sure to study your brick surface carefully. If you notice any holes or cracks between bricks, it is necessary to repair them before beginning a pressure washing routine. You can patch these areas quickly with mortar, but you must allow them to cure for at least a week before even thinking about pressure washing their surfaces.
  • Super Soaker
    Soaking brick surfaces with water from top to bottom will help prepare the brick for further cleaning. It will also help to prevent brick surfaces from absorbing any detergents used to clean them.
  • Pass the test.
    Test an inconspicuous brick area to better understand the force of pressure you need to clean the site properly. Starting with a low setting is critical and moving up slowly until you find the perfect amount of power.
  • Bring on the soap
    When cleaning brick-and-mortar surfaces, it is vital only to choose cleaning solutions designed to clean the brick. Applying the detergent from bottom to top can help prevent any streaking and then allow the cleaner to soak into the surface for 5 to 10 minutes, but never allow it to dry.
  • Up to the challenge.
    Use a rotary scrub brush on extra challenging stains to help loosen dirt and grime instead of just cranking up your power. When removing detergent from brick surfaces, it is essential to work from top to bottom. Then, gently spray water across the surface to reduce residue and get your brick surfaces clean again.

All decked out

Pressure washing your deck after years of buildup can leave it looking like new all over again. A deck is terrific for entertaining, relaxing, and just hanging out, but it's necessary to learn the proper way to protect and preserve it. Using a pressure washer to blast away built-up dirt and grime is much easier than getting on your hands and knees and scrubbing every square inch. Remember that deck surfaces are sensitive, so do your best not to harm your deck while pressure washing. Experts offer these tips and techniques for safely cleaning deck surfaces.

  • Prep time
    To prepare for pressure washing your deck, it is essential to sweep, rinse, and wet your deck thoroughly.
  • Stay protected.
    It is always important to remember to wear goggles, gloves, and waterproof clothes when pressure washing any surface of your home.
  • Test your pressure
    Just like with all of the other surfaces we've mentioned, picking an inconspicuous spot to test and starting at a lower pressure setting can help you see the level of pressure required for cleaning your particular surface. In addition, starting at lower pressure levels can help to prevent irreversible damage. Cleaning a deck definitely doesn't require the pressure needed for cleaning brick surfaces, so remember that lower is better for starting the job.
  • Steady motion
    Once you have found a comfortable setting for cleaning your surface without causing damage, begin spraying with a back-and-forth motion at least 2 feet from the surface. Allowing the high force spray to get too close to a wood deck can cause damage to wooden surfaces that result in costly repairs.
  • Stay on point
    Cleaning your deck requires laser focus, so be sure to keep safety as a top priority. Do not point pressure washer nozzles at glass, people, or animals. A pressure washer packs tons of power, so to avoid accidents keep your nozzle pointed at the deck.
  • Never go against the grain
    Pressure washing a deck requires working with the grain of the wood to prevent uneven spots. It can be helpful to start the job where the deck meets the foundation of the home and spray out any built-up debris or dirt.

If DIY pressure washing is too intimidating for you, do not hesitate to contact us for pressure washing in Orlando. We have the experience and expertise to get the job done right.